The all necessary files are compressed to three files.
In order to get these files, please fill in Requesting form below,
In order to get these files, please contact us.
Then, please go to Page 4 for our setup manual.
Setup_Manual_QNX6.6.0_RaspberryP2_Trial
This BSP needs activation key to activate your system.
Please let us know the serial code on your Raspberry pi 2 board.
You can sendus serial codes for maximum 10 Raspberry pi 2 boards per one purchasing.
Send to: qnx_support@swhwc.com
The way to know the serial code on your Raspberry pi 2 board is below,
1) Setup Linux Raspbian to your Raspberry pi 2 board.
2) Type “cat /proc/cpuinfo” at the command line.
So that you can see like below,
pi@raspberrypi:~$ cat /proc/cpuinfo
Processor : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS : 697.95
Features : swp half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb76
CPU revision : 7
Hardware : BCM2708
Revision : 1000002
Serial : 000000002eead346
In this case, “000000002eead346” is the serial code.
Please let us know it.
You can send us maximum 10 serial codes per one package.
Then, we will send the activation key (bcm2836.build)to you.
Replace (overwrite) valid active key (bcm2836.build) onto bsp-ntotrunk-broadcom- bcm2836-trunk\prebuilt\armle-v7\boot\build\bcm2836.build before building.